ASCOM Driver and Commander 5.0
This ASCOM Driver only works for a mount that uses RS232 Commander 2014 or later.Updated 12/21/2015
Supported Mounts:
- CEM60/CEM60-EC, with firmware version 151016 and later
- iEQ30 Pro/iEQ45 Pro/iEQ45 Pro AZ, with firmware version 151016 and later
- CEM25/CEM25-EC with 8408 hand controller firmware 151020 and later
- AZ Mount Pro
Minimum Requirement for this driver:
- Direct Mount Control (New Function): Windows XP/ Vista/ 7 /8 /8.1 /10 with .NET (dotNET) Framework 4.0 or later installed.
- Planetarium control via ASCOM: ASCOM Platform 6.1 and .NET Framework 4.0 or later
iOptron Commander and ASCOM Driver 5.0
Commander and ASCOM Driver Installer
ASCOM 5.0 Update Notes
Instruction of iOptron Commander and ASCOM Application
iOptron Control Command Language 2014 V2.0
|
Products
