iOptron ASCOM Driver and Commander V5.9


This ASCOM Driver only works for a mount that uses iOptron Mount RS232 Command Language 2014 V2.x.
Updated 6/30/2022

Supported Mounts:
  • AZ Mount Pro
  • CEM60/CEM60EC
  • iEQ30 Pro/iEQ45 Pro/iEQ45 Pro AZ
  • CEM25/CEM25P/CEM25-EC
  • Cube-II/CubePro w/8408
  • SmartEQ Pro+
Minimum Requirement for this driver:
  • Direct Mount Control: Windows 7/8.1/10/11 with .NET (dotNET) Framework 4.8 or later installed. Make sure .NET Framework 3.5 is activated in Windows 11.
  • Planetarium control via ASCOM: ASCOM Platform 6.5 SP1 or later
  • Latest firmware installed

Latest Version
Commander and ASCOM Driver Installer 5.9.0.2
ASCOM 5.9.0.2 Update Notes
iOptron Control Command Language 2014 V2.5

Previous Version
Commander and ASCOM Driver Installer 5.8.0.0
Commander and ASCOM Driver Installer 5.7.5.0
Commander and ASCOM Driver Installer 5.6.3.1
Commander and ASCOM Driver Installer 5.4
Commander and ASCOM Driver Installer 5.0