Home > Products > Accessories > Tripods and Piers >

Pier Top Plate
Pier Top Plate
 
Price: $60.00


Availability: Usually ships in 2 business days
Product Code: 8032PT


Select Mount*:

 
Description Technical Specs Support Documents
 
6" (150mm) iOptron Pier Top flange plate for building your own pier or modifying your existing tripod/pier.

Click HERE for the Pier Top CAD drawing.
Features
The Pier Top can be used to mount the following mounts (with appropriate mounting accessories):
  • CEM60 CEM60/CEM70
  • CEM40* CEM40/HAE43/HEM44/GEM45 (w/ center post & alignment peg)
  • iEQ30* iEQ30/iEQ30 Pro (w/ center post and alignment peg)
  • iEQ45 iEQ45/iEQ45-Pro (w/ center post and alignment peg)
  • AZ Mount Pro & MiniTower/MiniTower II/MiniTower Pro (w/ a center T-bolt)
* Due to small footprint of the mount base, the low-latitude operation may be affected.

Please select the accessories from the drop down option menu to add the needed for your mount. If you already have the accessory, just order the plate itself.
Average Rating: Average Rating: 3 of 5 3 of 5 Total Reviews: 1 Write a review »


  0 of 0 people found the following review helpful:
 
3 of 5 Requires some machining for the GEM45 September 20, 2023
Reviewer: Harold Davis from Beaverton, OR United States  
Bought this to attach a GEM45 to an iOptron 360 tri-pier. All the holes on this adapter are threaded. All the mounting holes on the tri-pier are threaded. To get this to work, I drilled out the four 8mm holes on the adapter with an 8mm drill. This removes the thread and yields a smooth bore 8mm bole hole. Then counter-sinked the holes to a depth where 8mm flat head bolts will not protrude above the top surface.


Was this review helpful to you?